POOL SYSTEMS

PRODUCT DESCRIPTION:

Multiseal POOL liquid sealant eliminates water loss in swimming pools. Multiseal Pool seals concrete and segmented basins. The seal itself does not appear in the basin.

DIRECTIONS:

Circulating pump and filters have to blocked or disconnected. The relevant amount of Multseal Pool is then poured directly into the basin water. The mixing ratio is 1 part Multiseal Pool for 1000 Litre of pool water. If Multiseal Pool comes on tiles or other objects, it is essential immediately to wash off with plenty of water because the product or will begin to crystallize and it is very difficult to remove later on - if at all.

Establish a circulation in the basin without filters. This can be done using eg a groundwater pump placed into the basin. Circulation will now have to run for 1 -3 days or until the leak in the pool is sealed. Afterwards pour the water out and rinse Basin - remnants of Multiseal Pool has to be removed mechanically. The swimming pool can now be filled again with clean water and related pool chemicals and taken into use again.

CLEANING and SAFETY INSTRUCTIONS:

By skin contact, wash off skin with plenty of soap and water. Wear safety goggles when working with MULTISEAL! By eye contact rinse immediately with plenty of water. Spills on clothing are removed easily at normal temperature machine wash. NOTE! To avoid falls and silicate sediments any spill of MULTISEAL has to be washed of immeditaly.