MULTITEC LEAK DETECTOR
LEAK DETECTING SPRAY
MULTITEC is a foaming leak detecting substance based on specially manufactured tensides (synthetic soap) for detecting leaks in air and gas pipes.
MULTITEC immediately reveals even the smallest leak because the foam applied immediately bubbles up when air or gas forces its way through it. MULTITEC is used without any form of preparation or cleaning. The product has a skin-friendly pH value and the propellant used is carbon dioxide (CO2) which is neither hazardous to the health nor inflammable. Withstands frost.
Spray MULTITEC on the pipe joint or wherever there is a suspicion of or risk of a leak, all the way around the pipe. Leaks will immediately be revealed as they will cause the liquid to bubble. The pressure in the tin will fall at very low temperatures, but will rise when the tin is warmed.
We have been made aware of that long-term damages can occur on certain kinds of plastic, when Multitec has been used for the leak detection. Thus we recommend that the user in general always makes sure that the product is suitable in the wanted installation, and that the test-spot is rinsed in water after the test. NB! Aerosol tins must never be exposed to temperatures in excess of 50º Celsius.
Wipe up any spilled liquid with a damp cloth. MULTITEC contains tensides (synthetic soap) which may be greasy. Therefore always make sure that any liquid spilled on the floor is cleaned up to avoid accidents. MULTITEC has a skin-friendly pH value (approx. 6.4) but should still be washed off with water. If the product is splashed into the eyes rinse immediately with plenty of water.
MULTITEC has been tested and approved by "Danmarks Gasmateriel Prøvning"
approval no.: DG - TV-00107.
|400 ml spray tin
|400 ml. spray tin -30°C