GLIDEX SPRAY

PRODUCT DESCRIPTION:

GLIDEX spray is made from 100% pure NSF-approved silicone oil. GLIDEX spray is a multiusable and efficient and does not contain any propellant harmful to the ozone layer.

TECHNICAL PROPERTIES:

GLIDEX silicone spray is extremely suitable as a slide coating for the assembly of plastic pipes, rubber strips and joints, when drawing cables in tubes and for the moisture insulation of electrical installations. Prevents ageing of rubber parts. Furthermore, GLIDEX spray is an efficient, quick-acting slide coating for sluggish locks, hinges, fittings, tools etc. Spray a layer on your saw-blade and it acts like a new one!

DIRECTIONS FOR USE:

Generally: Fittings and pipes should be cleaned for sand, earth and dirt.
GLIDEX spray: Shake the aerosol spray slightly. Hold the spray upright and the nozzle 10 - 20 cm from the subject. Spray an even layer of GLIDEX spray on the parts after which assembling can be carried out straight away. Is the GLIDEX spray to be used as a lubricant for hinges and the like the nozzle should be hold close to the part. Squeeze the nozzle carefully and let it work for a while (perhaps exercise the materials a little thus the silicone oil can penetrate).

GLIDEX spray do not dry up, and therefore later adjustment can easily be carried out

CAUTION! Make sure the GLIDEX spray does not get on floors and shue-soles as it will cause great risk of fall accidents. Do not ever use silicone oils in connection with painting.

The data given here are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user´s responsibility to determine suitability for the user´s purpose of any productionmethods mentioned herein.

TEST:

Neither VA-approval nor other specification approvals are required for sliding agents. GLIDEX spray is not injurious to health when used as prescribed.