UNITEC WATER

PRODUCT DESCRIPTION:

UNITEC WATER is the typical plumbers sealant. The product is highly resistant to shock and vibration. UNITEC WATER has medium locking force, which to a locking force with the same strength as a joint with jointing compound and Flax. Operating temperature from -50 - 150 °C. Dry to handle after 15 - 30 min. Function cured 1-2 hours. UNITEC WATER is approved for drinking water, gas and oxygen. 

(Because we have no control over the use of the product, we recommend test installation to ensure that the product is suitable for the intended installation.)

 

Product

Packing

Item no.

VVS-no.

RSK-no.

LVI-no.

 NRF-no.

 UNITEC
 WATER

50 ml tube

4091050

271340350

4051437

3186164

 9507962

 

75 ml "bellows" tube

4091075

271340375

4051438

3186165

 9507963

 

100 ml "bellows" tube

4091100

271340400

4051439

3186166

 9507964

Related products

Unitec-HOT-75-ML.jpg Unitec Hot Unitec Hot UNITEC HOT is especially suitable for joints exposed to high temperatures up to 230 °C. The product is extremely resistant to shock and vibration, and has a high locking force, which corresponds to a locking strength that actually corresponds to a thread locking and separation requires heating with a blowtorch. Operating temperature from -50 to 230 ° C. Cured to handle after 20-40 min. Function cured 3-6 hours. UNITEC HOT is approved for gas and high temperatures up to 230 °C.
Klik for at læse mere
PVC_lim.png Unitec PVC Unitec PVC UNITEC PVC is a patented special adhesive for bonding PVC plastic and it is the only completely odorless PVC Glue on the market!
UNITEC PVC is particularly suitable where a long open time and good gap filling properties are requested. The product can be used for bonding hard PVC, for plants with water and chemical-loaded systems, corresponding to the scope of PVC.
Klik for at læse mere
Loxeal_Attivator11.jpg Aktivator At-11 Aktivator At-11 Loxeal A11 activator speeds up the polymerization of anaerobic glue. Ideal for use at low temperatures and with passive metals such as stainless steel and chromium plated items.
Klik for at læse mere
Unitec-Easy-75-ML.jpg Unitec Easy Unitec Easy UNITEC EASY is characterized by light locking strength and easy assembly and disassembly even after years. UNITEC EASY is resistant to shock and vibration. Operating temperature from -20 to 150 °C. Cured to handle after 20-40 min. Function cured 1-3 hours. UNITEC EASY is approved for gas.
(Because we have no control over the use of the product, we recommended test installation to ensure that the product is suitable for the intended installation.)
Klik for at læse mere

Need help? - Write to us