GLIDEX silicone paste is made from 100% pure silicone oil. It is available in a handy tube with a shoe-polish sponge for direct application. GLIDEX silicone paste is totally solvent-free. Meets German TZW/UBA-requirements for use in drinking water installations.
GLIDEX silicone paste is extremely suitable as a slide coating for the assembly of plastic pipes, rubber strips and joints, when drawing cables in tubes and for the moisture insulation of electrical installations. Prevents ageing of rubber parts. Furthermore - a little paste on the tip of the screw and it works swimmingly!
DIRECTIONS FOR USE:
Generally: Fittings and pipes should be cleaned for sand, earth and dirt.
GLIDEX paste: Squeeze out a "line" of silicone paste of 1 - 2 cm on the sponge and divide the silicone paste evenly on the materials which are to be assembled. Assembling can be carried out.
GLIDEX silicone paste does not dry up, and therefore later adjustment can easily be carried out
CAUTION! Make sure the GLIDEX silicone paste does not get on floors and shue-soles as it will cause great risk of fall accidents. Do not ever use silicone oils in connection with painting.
The data contained given here are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user´s responsibility to determine suitability for the user´s purpose of any productionmethods mentioned herein.
Neither VA-approval nor other specification approvals are required for sliding agents. GLIDEX silicone paste is not injurious to health when used as prescribed.
|50 gr. tube with sponge
|06 1722 001
|311 51 09