SAN SPRAY

PRODUCT DESCRIPTION:

S.A.N.® silicone Spray is made of 100% pure, NSF-approved high-grade silicone-oil. S.A.N.® silicone Spray has a full 30% concentration of silicone-oil, which makes it very efficient and economical in use. It is fitted with an "up-side-down" valve enableing it to be used in any angle. S.A.N.® silicone Spray is solvent-free and and does not contain propellants harmful to the environment or the ozon-layer.

 

TECHNICAL PROPERTIES:

S.A.N.® silicone Spray is extremely suitable as a slide coating for the assembly of plastic pipes, rubber strips and joints, Drawing of cables in tubes and for the moisture insulation of electrical installations. Prevents ageing of rubber parts. Furthermore, S.A.N.® silicone Spray is an efficient, quick-acting slide coating for sluggish locks, hinges, fittings, tools etc. Spray a layer on your saw-blade and it acts like a new one!.

 

DIRECTIONS FOR USE:

Fittings and pipes should be cleaned for sand, earth and dirt. Shake the aerosol spray slightly. Hold the the nozzle 10 - 20 cm from the subject. Spray an even layer of S.A.N.® spray on the parts after which assembling can be carried out straight away. Is the S.A.N.® spray to be used as a lubricant for hinges and the like the nozzle should be hold close to the part. Carefully press the valve and let the silicone-oil work for a while (exercise the materials a little thus the silicone oil can penetrate if necessary). S.A.N.® silicone lubricant does not dry up, and therefore later adjustment can easily be carried out.

CAUTION! Make sure the S.A.N.® silicone lubricant does not get on floors and shue-soles as it will cause great risk of fall accidents. Do not ever use silicone oils in connection with painting.

The data contained herin are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user´s responsibility to determine suitability for the user´s purpose of any productionmethods mentioned herein.
 

PACKAGING  
    Item no. VVS-nr. RSK-nr. NRF-nr. LVI-nr.
500 ml. aerosoldåse (12ds/krt.) 2000003 06 1721 006 3115124 9507868 2241458

Related products

2000020-Glidex_Armaturfedt_30g.png Tap Lubricant Tap Lubricant GLIDEX armaturfedt er fremstillet af en 100% ren, lugtsvag silikoneolie. GLIDEX armaturfedt fås i en lille og handy plasttube med 30g og i en 900g dåse. TZW-godkendt til drikkevand.
Klik for at læse mere
Superglidex400g.jpg Super Glidex Super Glidex SUPER GLIDEX is a snow-white, pleasant smelling and silicone-based lubricant which facilitates assembly of O-ring sealed pipes etc.. SUPER GLIDEX has a pleasant creamy consistency. Neutral pH-value (about 7). Frost-proof. Replaces traditional soap-based lubricants. Exists also in a special version with freezing point below -30°C.
Klik for at læse mere
Special_Glidex_1_kg.jpg Special Glidex Special Glidex Special GLIDEX ia a highly efficiant soap based lubricant which is applied for the assembly of O-ring sealed muff pipes made of metal or plastic.
Klik for at læse mere
Sprinkler_Glidex_1_kg.jpg Sprinkler Glidex Sprinkler Glidex Sprinkler Glidex. Silicone based assembly paste for sprinkler pipes. Non-drip, anti-corrosive and freezeproof..
Klik for at læse mere
Glidex_Silikonespray.jpg Glidex Spray Glidex Spray GLIDEX spray is made from 100% pure NSF-approved silicone oil. GLIDEX spray is a multiusable and efficient and does not contain any propellant harmful to the ozone layer.
Klik for at læse mere
2000020-Glidex_Silikonepasta_200g.jpg Glidex Paste Glidex Paste GLIDEX silicone paste is made from 100% pure silicone oil. It is available in a handy tube with a shoe-polish sponge for direct application. GLIDEX silicone paste is totally solvent-free. TZW-approved for drinking water.
Klik for at læse mere

Need help? - Write to us