NEW!
Kolmat Fibre Seal
PRODUCT DESCRIPTION:
For sealing conical and cylindrical metal and plastic threaded connections. Suitable e.g. for (drinking) water, gas, LPG (gas) and (compressed) air. Applicable for e.g. copper, brass, (galvanized) steel, stainless steel, chrome, zinc, PVC, CPVC and ABS. Gas: up to 5 bar pressure at -20 °C - +70 °C. Water up to 16 bar pressure at +95 °C, up to 7 bar pressure at +130 °C. Limited resistance to chemicals. Not suitable for oxygen.
APPROVED FOR DRINKING WATER.
PROPERTIES:
- Fibre-reinforced
- Re-adjustable > 180°
- Removable
- Immediately loadable
DIRECTIONS FOR USE:
- Clean and degrease surfaces. Smooth surfaces such as brass, stainless steel and chrome must first be roughened.
- Apply the dark green side of the tape to the thread, winding tightly and pressing it firmly in the direction of the thread while allowing a 50% overlap. If a 50% overlap is not possible, then apply 2-3 windings and pull tape tight, so that it is pressed into the screw thread. In case of a loose fit, it may be necessary to apply more windings.
- Assemble joint. Joint is adjustable to at least 180°. Our advice is based on extensive research and practical
experience. However, in view of the large variety of materials and the conditions under which our products are applied, we assume no responsibility for the results obtained and/or any damage caused by the use of the product.
| Carton | Item no. | EAN-no. | VVS no. | RSK no. | NRF no. | LVI no. | |
|---|---|---|---|---|---|---|---|
| Box | 12 | 7005746 | 87104393111906 | 271414115 | 4058404 | 1391415 | 3265273 |
