NEW!

POLY MAX® High Tack Express

PRODUCT DESCRIPTION:

Solvent-free assembly adhesive based on SMP-Polymer with very high initial bond strength and very fast strength gain. Excellent for heavy materials and for bonding and fixing many construction materials on practically all surfaces, such as wood, plaster, (natural) stone, (cellular) concrete, metal, hard foam and various plastics.

PROPERTIES:

• Very high initial bond strength
• Very fast strength gain High
• Permanently elastic
• Very good filling capacity
• Good standing power
• Non-shrinking, 100% adhesive
• Solvent-free
• No soiling of joint edges
• All-weather resistant
• Resistant to temperatures between -40 °C and +100 °C
• Paintable
• Curing ca. 1.6 mm/24 hours 

DIRECTIONS FOR USE:

1. Before using open cartridge at the top by cutting off the plastic nipple above the thread with a sharp knife.
2. Then fix the nozzle and cut at an angle (opening at least Ø 5 mm). Only apply with special nozzle supplied. 
3. Depending on the weight of the material, apply the adhesive evenly in vertical strips or dots at intervals of between 10 and 40 cm. Always apply the adhesive to the corners and along the edges. Mutual moving of materials (facade panels) can be accommodated through an adhesive thickness of 3 mm (use spacer blocks, or tape). Assemble materials with a sliding movement and press or hammer firmly together. Correction is still possible. 
4. Close the cartridge properly immediately after use.

CLEANING:

Stains/residue: Remove adhesive residues immediately with white spirit. Dry adhesive residue can only be removed mechanically.

POLY MAX High Tack has an EPD (Environmental Product Declaration) and complies with European and international environmental standards.