NEW!

HBS-200® 

PRODUCT DESCRIPTION:

Unipak® HBS-200® Liquid Rubber is a waterproof, airtight and protective coating. Suitable for sealing and protecting a wide variety of materials, such as concrete, metal, stone, wood, bitumen, zinc, PVC, EPDM (make a test first), etc. For floors, partitions, walls, seams, joints, conduits and structural components. Excellent for both interior and exterior applications (bathrooms, cellars, balconies, roofs, etc.) including gutters, shower basins, conduit ducts, floor seams, expansion joints, window frame joints and ground level items. Also suitable as a waterproof layer under tiles in damp environments such as bathrooms, swimming pools, balconies, terraces, etc. 

DIRECTIONS FOR USE:

1. Before use, stir manually until a homogenous colour is obtained. It is not recommended to use an electric mixer with a high rotational speed for stirring. 
2. Apply in multiple layers. 
3. Preferably, let the previous layer properly dry before applying the next layer. Drying time depends on relative humidity, temperature and surface. 
4. For seam, crack and tear-bridging applications, Unipak® HBS-200® GeoTextile should be used. Unipak® HBS-200® GeoTextile must be applied in still wet HBS-200® Liquid Rubber. Then immediately level off with a second layer of HBS-200® Liquid Rubber. 

POINTS OF ATTENTION:

To only be used at temperatures above +5 °C. After approximately 60 minutes a surface skin forms, which can be loaded with (light) rainfall after 4 hours. Completely waterproof after 24 hours. If a joint sealant is used in combination with HBS-200® Liquid Rubber, we strongly recommend to use a neutral silicone sealant, to prevent discoloration of the sealant. 

CLEANING:

Immediately remove wet residue with water or Unipak® Cleaner Wipes. Dried residue can only be removed mechanically.