NEW!

UNIPAK SEALANT FINSIHER

PRODUCT DESCRIPTION:

Spray for perfect smooth Joints. Unipak Sealant Finisher is the ready-to-use, acid-free smoothening spray for quick and easy finishing of sealant joints. Ideal for smoothening joint sealants, such as Silicone-, Polyurethane- and Polymer sealants. Not suitable for acrylic sealants. ser.

PROPERTIES:

• Ready to use easy smoothening spray
• For perfect smooth joints
• Less chance of moulds to grow
• Accelerates curing of sealants
• Bottle made of 70% recycled plastic

DIRECTIONS FOR USE:

Turn the spray cap a quarter turn. Spray the Sealant Finisher within 10 minutes after applying the sealant, from a distance of approximately 30 cm, onto the sealant joint. Moisten the flat side of the Unipak Sealant Finishing Tool or a finger with the Sealant Finisher and smoothen the joint. Due to the Sealant Finisher the sealant will not stick to the Sealant Finishing Tool or any other finishing tool, making smoothening fast and easy. Allow the sealant joint to cure according to the instructions of the sealant. After use, close the sprayer by turning the cap a quarter turn.

Points of attention::

Unipak Sealant Finisher is acid-free & biodegradable and can be used on most surfaces. Considering the large variety of materials and sensitive surfaces, such as marble and
natural stone, we recommend pre-testing on a non-visible spot. It is recommended that after using the Unipak Sealant Finisher and sufficient skin formation of the sealant, to rinse the joint with clean water. Also to prevent any traces of the Unipak Sealant Finisher on sensitive materials.