NEW!

UNIPAK SEALANT FINISHING SET

PRODUCT DESCRIPTION:

Set is a set of 4 different tools for smoothening all sealant joints. For beautiful, tight and very smooth joints in bathrooms, toilets, kitchens and for any other sealing application. The Finishing Tools are made of thermoplastic rubber, making them super long-lasting and easy to clean. Thanks to its small shape, the aid can also be used for sealant joints in places that are difficult to reach, such as, sinks or baths with mounted taps or shower fittings.

PROPERTIES:

• Set of 4 tools made of thermoplastic rubber
• Multi-functional: for round joints, 45° & 90° joints and flat joints
• Easy to clean – sealant residues removed easy

DIRECTIONS FOR USE:

Spray Unipak Sealant Finisher or an acid-free soap-water solution over the applied sealant joint. Moisten the flat side of the Unipak Sealant Finishing Tool with Unipak Sealant Finisher. Place the flat side of the tool with the exact joint width dimension onto the joint and smoothen the sealant by pulling the Finishing Tool towards you.

Note: Keep the tool tight against the substrate and the wall. Wipe off the excess sealant on a cloth. Let the sealant cure according to the instructions of the respective sealant.

Points of attention:

• Check beforehand if the joint width is the same over its entire length.
• Smooth horizontal joints in sanitary areas at a 45-degree angle to allow water to drain properly. This prevents dirt and soap residue from being left behind, which can cause mould.
• The Sealant Finishing Tool is easy to clean with a damp cloth.
• Use the small diameter of the Sealant Finishing Tool to remove excess sealant between the tile joints.