Catalogue / Multiseal / Sewer & Drain

Name

Sewer & Drain


PRODUCT DESCRIPTION:

Multiseal Kloak (Sewer) liquid sealant and Multiseal HC60 (activator for Multiseal Kloak) is a two-component system that eliminates water loss in underground sewers and drains. For sealing of indoor drains please see the full description herafter for Multiseal Afløb (Drain).

Multiseal Kloak can be used in sewers and drains in all materials - plastics, cast iron, ceramics, concrete and lead. There may be sealed leaks on both sewer, tubes and muff-connection. Multiseal Kloak crystallizes when the hardener HC60 is added. Hereby a mechanical seal of the leakage is created, with Multiseal Kloak becoming firmly attached to the sewer pipe and also hardens up in the leakage field outside the pipe. A seal with Multiseal Kloak is permanent and durable.

TECHNICAL PROPERTIES:

MULTISEAL sealing systems are based on dispersed crystalline minerals. MULTISEAL Kloak (sewer) is pumped into the sewage system and leaks are sealed here "by itself" through sediments of silicate left on the edge og the leakage. The final hardening of the seal is created by the hardener HC60 - Multiseal Kloak is a two component system.

DIRECTIONS:

Before carrying out a seal with Multiseal Kloak we recommend that the sewer piece to be sealed is thoroughly cleaned with compressed water. Multiseal Kloak and Multiseal HC60 hardener should not be mixed, but are collected separately for subsequent recycling.

After cleaning the drain has to be blocked ensuring that the part of the tube with the leak is above the blockage. A typical situation by sealing an underground sewer in a one-family house could be to clean and block the sewer part with the leak as described above (camera inspection). After having blocked the sewer part with leak, this string is filled with Multiseal Kloak . Typical this is done by pumping Multiseal Kloak (used undiluted - remember to shake the bottle) through the blockage into the lowest part of the sewer string which has to be sealed until the product appears in the sewer system's lowest point indoors. This could be the floor drain in the shower where you have a man situated ensuring that the filling of the sewer is stopped before a possible overflow. There should be 2 m water column over the leaking sewer’s lowest point. The product remains in the drain for 1 hour. Now empty the leaky sewer full of Multiseal Kloak, rinse the pump thoroughly and Multiseal HC60 has to be pumped immediately into the sewers in the same way as Multiseal Kloak. Also Multiseal HC60 hardener must remain in the drain for 1 hour. Then drain the sewer also completely for HC60 and wash the pump with clean water. The process is repeated once again. A typical seal thus takes at least 4 hours. After the final discharge of hardener the sewer is sealed and may now be tested. If the sewer is still leaking the process is repeated a third time. When the sewer is sealed flush it once through with compressed water to remove any remnants of Multiseal Kloak from sewage pipes inside and the sewer system may be taken into service.

Maximum water loss.

The water column must be 2 m above the lowest point of the sewer which you want to seal. The water loss must not be more than 70% of the total water in the pipe section you want to seal within 15 min.

CLEANING:

If Multiseal Kloak comes into contact with eyes, rinse immediately with plenty of clean water and seek medical advice. Skin contact: Wash skin immediately with plenty of water. Wear suitable protective gloves and goggles or face shield when working with MULTISEAL Kloak! Spills on clothing are removed easily at normal temperature machine wash. NOTE! To avoid falls and silicate sediments any spill of MULTISEAL has to be washed of immeditaly.

PRODUCTS:

PACKAGING

 Product

 Packaging

Item no.

VVS-no.

RSK-no.

NRF-no.

LVI-koodi

MULTISEAL Kloak.

10 Lcan

8022100

251221110

4054435

9815795

3265249

MULTISEAL Kloak.

30 Lcan

8022300

251221130

4054436

9815796

3265250

MULTISEAL HC60 10 L can

8023100

251221810

4054437

9815797

3265251

MULTISEAL HC60 30L can

8023300

251221830

4054438

9815798

3265252

TECHNICAL PROPERTIES:

Multiseal Drain liquid seal eliminates water loss in drains and down pipes indoors. Multiseal drain can be used for sealing drains (free or laid down in concrete)   in all materials - plastics, cast iron, ceramics, concrete and lead. Both leaks in pipes, down pipes and at the muff connection itself may be sealed. Multiseal Drain crystallizes at contact with the air. This will create a mechanical seal at the leakage site. A seal with Multiseal drain is permanent and durable.

DIRECTIONS:

Prior to sealing with Multiseal Drain we recommend that highly polluted down pipes are cleaned thoroughly. If you want to seal the underground sewer lines, we refer to Multiseal Sewer and Multiseal HC60 (hardener). Before sealing with Multiseal Drain, the down pipe has to be blocked and filled with water allowing you to get a picture of the leak size. Some water loss may occur in connection with this part of the process.

After cleaning, the appropriate part of the drain is isolated so that the leakage is over the barrier. Multiseal drain is mixed with water and poured into the part of the drain that you want to seal. The mixing ratio is 1 part Multiseal Drain to 5 parts water. Depending on the leak size and humidity around the leak the Multseal drain/water mixture must remain in the drain 1 to 2 days.  

Maximum water loss.

The water column must be 2 m above the lowest point of the pipe which you want to seal. The water loss must not be more than 70% of the total water in the pipe section you want to seal within 15 min.

CLEANING:

If Multiseal Drain comes into contact with eyes, rinse immediately with plenty of clean water and seek medical advice. Skin contact: Wash skin immediately with plenty of water. When working with Multiseal Drain wear suitable protective gloves and goggles or face shield.
Multiseal Drain must be immediately washed with water if it comes to surfaces outside of the pipe system (tile, laundry, etc.) because otherwise crystallization will take place, and the crystallised product is very difficult to remove. Moreover, observed the usual precautions when handling chemicals. Keep out of reach of children

PRODUCTS:

 

PACKAGING

 Product

 PACAKAGING

Item no.

VVS-no.

RSK-no.

NRF-no.

LVI-koodi

MULTISEAL Drain.

5 L can

8021050

251220050

4054431

9815791

3265245

MULTISEAL Drain

10 L can

8021100

251220110

4054432

9815792

3265246

MULTISEAL Drain

30 L can

8021300

251220130

4054433

9815793

3265247