HEATING

PRODUCT DESCRIPTION:

MULTISEAL is a liquid sealant which is added directly to the water in a closed heating system for sealing off hidden leaks. MULTISEAL is available in different product varieties attuned to the environment where a leak has to be sealed. MULTISEAL for heating can be used in connection with district heating systems, all heating systems with heaters with oil burner or fuel boilers - espicially useable in connection with floor heating systems but the product is effective as a sealant for all hidden leaks.

TECHNICAL PROPERTIES:

MULTISEAL sealing systems is based on dispersed crystalline minerals. MULTISEAL is pumped into the heating system and leaks are sealed here in a few days "by itself" through sediments of silicate left on the edge of the leakage. It is therefore not necessary to know exactly where any leakage is to seal it with MULTISEAL – MULTISEAL simply has to circulated in the system in the rigth concentration for a few days in a loop (heating-systems) and within a few days the leak will be sealed - the period of the sealing process depends on the leak size and temperature of the evironment. A seal with Multiseal 24, Special, TD and TDS is permanent and durable – a correct conducted repai will withstand up to 15 bars and 1200°C. Multiseal 24, Special, TD and TDS can also be used in open systems. Multiseal is filled through a filling pump in the boiler.

DIRECTIONS:

Rinse the the heating system using MULTISEAL cleaning fluid (only necessary in older instalations). MULTISEAL is pumped into a loop or directly into the heating instalation. It is very important to pump exactly so much Multiseal into the system or loop until the desired pH value in the circuit is achieved according to product and type of installation. A circulation must then be established and within a few days the leak will be sealed - the period of the sealing process depends on the leak size and temperature of the evironment. Adding heating to the cirkulating Multiseal/water mixture will speed up the sealing process.  When the leak is sealed, the system may be rinsed with pure clean water and the sealing process is completed. Alternatively MULTISEAL may be kept in the system water at the right concentration (not possible in district heating systems). When sealing heating systems with press fittings, MULTISEAL 30E is recommende, and this product must remain in the system.(please read seperate instruction manual)

CLEANING:

By skin contact wash off skin with plenty of soap and water. Wear safety goggles when working with MULTISEAL! By eye contact away rinse immediately with plenty of water. Spills on clothing are removed easily at normal temperature machine wash. NOTE! To avoid falls and silicate sediments any spill of MULTISEAL has to be washed of immeditaly.

PRODUCTS

MULTISEAL Heat S Liquid sealing for heating systems with fluid loss of up to 30L per 24 hours
MULTISEAL Heat M. Liquid sealing for heating systems (disrtict heating and fuel boilers) with fluid loss of up to 400L per 24 hours
MULTISEAL Heat L Liquid sealing for heating systems (district heating and fuel boilers) with fluid loss of up to 1000L per 24 hoursbr
MULTISEAL Heat XL Liquid sealing for heating systems (district heating and fuel boilers) with fluid loss of more than 1000L per 24 hours.
MULTISEAL Heat 30E Liquid sealing for heating systems with gas boilers with fluid loss of up to 30L per 24 hours. Espicially well suited for press fittings. NB!: The product must remain in the system after sealing. Not suited for district heating systems.